![]() Pull up on the levers, tilt seat forward and pull back slightly to disengage, then lift seat up and remove.ĥ. Loosen the negative battery cable fastener from both batteries with a 10mm socket to prevent arcing and set the cables aside.Ħ. Turn the four knobs one quarter turn counterclockwise. To install the Audio Roof Kit by Rockford Fosgate® on your 2-seat RZR Pro XP or RZR Turbo R, follow these steps:ġ. Start by parking the vehicle on a flat, level surface, ensure the vehicle is in PARK and remove the key.ģ. If not already installed, install the Dual Battery Kit ( part number 2884347).Ĥ. Remove both seats. Always check the fitment of accessories before purchasing the kit. ![]() Failure to observe these precautions may result in vehicle rollover, injury or death. ![]() Take extra precautions, such as slower speeds, increased stopping distance and care taken on inclines when driving with added accessory weight. Note: The Polaris Audio Roof can affect vehicle handling due to added weight mounted to the top of the vehicle. If your vehicle is equipped with RIDE COMMAND, you need to first perform the 2020+ RZR Pro XP and 2022+ Turbo R Audio Roof Kit DSP Module Installation to allow the new roof speakers to communicate with the RIDE COMMAND unit.īoth kits require the pre-installation of the Dual Battery Kit ( part number 2884347) to support the vehicle's power needs. If your RZR was equipped with speakers, install the Audio Roof Kit by Rockford Fosgate® is part number 2889711. This kit requires the additional installation of the amp upgrade kit ( part number 2884908) if your vehicle is not equipped with RIDE COMMAND. If your RZR was not equipped with speakers, install the Audio Roof Kit by Rockford Fosgate® is part number 2889710. For more information on tools, read the Tools and Fasteners Guide. Always wear safety glasses and nitrile gloves when installing accessories on your Polaris RZR.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |